ADC Kentrox ISDN NT1 1010 Specifiche Pagina 18
- Pagina / 552
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Model No.
Running Head
Japan
Class A ITE Notification
Europe
European Telecommunication Approvals
Under the Telecommunications Terminal Directive the following connections are approved:
The WAN DUAL card, the WAN SINGLE card, and the 120 ohm version of the DSX/CEPT
module are approved for connection to ONP unstructured and structured 2048 kbps digital
leased lines with G.703 interfaces, following assessment against CTR12 and CTR13.
United Kingdom
UK Approval Number
The BABT approval number is M606037.
The WAN DUAL card, the WAN SINGLE card, and the 75 ohm version of the DSX/CEPT
module, connected via the BNC connector panel are approved for connection to UK 2048 kbps
digital leased lines with G.703 (75Ohm) interfaces.
UK Compliance Statements
The E1 Interface is approved in the UK for direct connection to PTO-provided circuits
operating at data rates up to 2.4Mbit/s.
The E1 Interface comprises a combination of single or dual WAN cards, CEPT modules, and
connector panels as listed in the UK approval documentation.
- Integrated Access System 1
- System Reference Guide 1
- Publication 999-001989 1
- Product Description 3
- New System Features 3
- Features in this Release 3
- System Cards 4
- Voice Cards 5
- Data Cards 6
- Optional Features 7
- User Card Reference Guides 9
- Model No 10
- Running Head 10
- WARNING! 11
- Grounding 12
- FCC Part 68 Information 15
- CE Marking 16
- Declaration of Conformity 16
- United Kingdom 18
- UK Compliance Statements 18
- Contents 21
- Chapter 1 43
- System Overview 43
- Chassis Types System Overview 44
- System Overview Chassis Types 45
- Power Supply and 51
- Ringer Supports 51
- Chapter 2 55
- Applications 55
- 2.2 Sample Applications 56
- 2.3.3 E&M Card 58
- 2.3.5 TR008 Application 60
- 2.4.1 HSU Card 62
- 2.4.2 HSU Application Example 64
- 2.4.3 SRU Card 64
- IAD w/ SRU 65
- 2.4.4 FRAD Card 66
- 2.4.5 OCU-DP Card 67
- 2.4.6 BRI Card 69
- 2.4.6.1 BRI Card Models 70
- 2.4.7 DSO-DP Card 71
- T1/E1 carrier 74
- . . . . . 75
- Provider 79
- Backbone 80
- 2.6.6 PRI to FXS termination 83
- 2.6.7 Routing Capabilities 83
- 56/64Kbps 93
- 2.9 ATM Server Card 95
- ATM Server Card Applications 96
- Applications ATM Server Card 97
- ATM Edge Switch 97
- 2.10 Routing Server 99
- Routing Server Applications 100
- Reference Guide 101
- Router Router 104
- System Installation 107
- Chapter 3 107
- 3.3.2 Pre-Installation Tips 108
- 3.3.4 Installing the Chassis 110
- Holes for Tabletop Attachment 111
- Inches 10 15 3/4 2 113
- Centimeters 25 38 2 5 113
- CAUTION! 114
- 3.5 Ringing Generators 116
- Side in a A/C Environment 121
- Model: IMACS/800 123
- AC “third wire” Ground 127
- 3.7 Powering Up the System 128
- 3.8.2 CPU Card (8803) 129
- 3.8.4 Server Cards 129
- 3.8.5 User Cards 130
- Chapter 4 131
- 4.3.1 Registration 132
- 4.3.2 Logging Into the System 137
- 4.4 System Screens 141
- 4.4.3 Server Card Status 143
- 4.4.4 Card Main Screens 144
- 4.5 Card Configuration 146
- 4.6 Reinitializing the System 148
- 4.7 Alarms 150
- 4.7.2 Alarm Filter Settings 152
- 4.7.3 Alarm Modifiers 155
- 4.7.4 Alarm Cutoff (ACO) 155
- 4.7.6 Alarm Handling 156
- 4.11 Cross-Connecting (XCON) 158
- 4.12 System Level Maintenance 158
- 4.12.2 Zipping the System 160
- 4.12.3 Debugging the System 161
- 4.12.4 Registering the System 161
- 4.12.6 TFTP Backup for 5.x.x 162
- 4.12.7 TFTP Restore for 5.x.x 163
- 4.12.8 ASCII Backup Procedure 164
- 4.14 CPU Switching 167
- 4.15 Time Slot Assignment 167
- 4.16 Assigning Time Slots 168
- 4.16.3 Cross-Connect Model 171
- CIRCUIT ID 179
- Figure 4-28. WAN Unit Options 181
- Figure 4-30. Test Options 183
- 4.19 Cross-Connect Actions 192
- Tx ABCD BITS 197
- 4.21.1 WAN Link to WAN Link 207
- Figure 4-52. The TADS screen 209
- 4.21.4 Monitor Circuit 210
- 4.21.5 Split Circuit 213
- 4.21.6 Release 215
- Action Function 217
- 4.24 Redundant Operations 222
- 4.25 Power Supply Redundancy 222
- 4.26 CPU Card Redundancy 223
- 4.27 WAN Card Redundancy 225
- 4.28 ADPCM Card Redundancy 229
- Chapter 5 233
- CPU Card 233
- 5.3.1 CPU Card Main Screen 235
- PRT PHONE# 241
- PRT RETRY 241
- PRT ATTEMPTS 241
- PRT, MAJ&CRIT 241
- PRT MIN&INFO 241
- 5.4 TCP/IP Network Management 242
- HOST IP STATE 245
- HOST IP ADDR 245
- DEFAULT IP SLOT 247
- RPT1 COMMUN STR 249
- RPT2 IP ADDR 249
- RPT2 COMMUN STR 249
- RPT3 IP ADDR 249
- RPT3 COMMUN STR 249
- Frames Transmitted 253
- Frames Aborted on Transmit 253
- 5.4.1.3 IP Parameters 253
- Default TTL 253
- 5.4.1.6 UDP Parameters 259
- Packets From Above 259
- Packets Sent 259
- 5.4.1.8 SNMP Parameters 261
- PDUs Sent 261
- Traps Sent 261
- Sessions Closed 261
- TX Wait for Buffer 261
- 5.5 IP Packet Routing 262
- CPU Card IP Packet Routing 263
- IP Packet Routing CPU Card 264
- 5.5.1 nX64 Screen 270
- 5.6.1 Equipment Requirements 274
- 5.6.2 Laptop Setup 274
- 5.6.3 Upgrade Preparation 275
- 5.7.1 CPU Swap 276
- 5.8 CPU Card Error Messages 280
- 5.9 CPU Card Troubleshooting 280
- 5.10 CPU Card Specifications 281
- Chapter 6 283
- Interface Card 283
- 6.2.1.3 External Sync Panel 285
- 6.3.2 Call Profile Screen 295
- CALLED # 297
- CALLED # TYPE 297
- CALLED # PLAN 297
- CHANNEL RATE 297
- RATE MULTIPLIER 297
- PRESENT. INDCTR 299
- SCREEN. INDCTR 299
- BCAST. PHONES 299
- 6.3.4.1 Identification 301
- 6.3.4.2 Network Priorities 302
- 6.3.4.4 Terminal Security 302
- AT Command Function 303
- 6.3.5 Ports Screen 304
- PROTOCOL 305
- HANDSHAKE 305
- 6.3.7 Using the Node Port 307
- 6.5.1 User Interface Problems 308
- Chapter 7 313
- WAN Card 313
- Figure 7-2. WAN-U DUAL Card 315
- 7.3 WAN Module Descriptions 317
- Side View 325
- Remove all plastic standoffs 325
- 7.4.1 T1 CSU and DSX Settings 330
- Table 7-6. AIS/ALM Settings 335
- LOCAL LB 336
- ESF/NMS RP 337
- 7.4.2 E1 CEPT/HDSL Settings 340
- EER THRHD 351
- RDNT RULES 351
- 7.4.4 Cross-Connect (XCON) 353
- 7.4.5 Performance Data 355
- 7.4.7 Test Screen 360
- 7.4.8 Adtran E1/HDSL Screen 363
- QLTY LP1 365
- QLTY LP2 365
- (local 15-minute interval) 365
- Loopbacks toward Master OEM 371
- Module (or HiGain HLU) 371
- Loopbacks toward Slave OEM 371
- Module (or HiGain HRU) 371
- LB STATE 373
- *REMOTE* 373
- 7.5 PARS Screen 374
- WAN Card PARS Screen 375
- PARS Screen WAN Card 376
- 7.5.1 Implementation of PARS 378
- 7.5.3 One Link is Lost 380
- 7.6 WAN Card Error Messages 388
- 7.7 WAN Card Troubleshooting 388
- 7.8 WAN Card Specifications 389
- E1 Interface 391
- E1 HDSL Interface 391
- Chapter 8 393
- 8.3.2 Voice Diagnostics 395
- 8.3.3 Data Diagnostics 396
- 8.4.1 Circuit Diagnostics 398
- Figure 4 401
- Figure 1 401
- Figure 2 401
- Figure 3 401
- 8.6 Performance Monitoring 403
- Appendix A 405
- A.2 Standards Compatibility 406
- Interface Cards 407
- WAN Cards 407
- E&M Cards 409
- FRAD Cards 409
- OCU-DP Card 409
- HSU Cards 411
- SRU Card 411
- A.3 Chassis Standards 412
- A.3.2 Chassis Power 413
- A.3.3 Environment 413
- A.3.4 Equipment Handling 414
- A.3.6 Cable/Power Connections 415
- A.3.7 Mounting 415
- A.3.8 Number of Slots 416
- Manufacturer Part Number 419
- A.5 Card Specifications 420
- A.7 FCC Requirements 425
- A.8 UK Requirements 426
- A.9 Year 2000 Compliance 427
- Appendix B 429
- Error Messages 429
- Appendix C 449
- C.2 Interface Cards 450
- Using the COM2 Port 451
- Figure C-2. RJ48 (COM2) Jack 451
- Using the Management Port 455
- C.2.2 INF+M Card (8923) 458
- Using the Modem Port 459
- Figure C-9. MODEM Jack 459
- WAN Port Connections 463
- Figure C-13. NET Jack 463
- C.2.3 INF Card (8924) 465
- C.3 Alarm Cards 468
- C.3.2 ALR 4+3PF Card (8402) 469
- C.3.3 ALR 28+14 Card (8403) 470
- Voice Circuit Connection 473
- Figure C-20. RJ-11 Jack 473
- C.4 HSU Cards 474
- Pin Function Direction 475
- C.4.2 HSU-T V11 Card (8203) 476
- C.4.3 HSU 35 Card (8212) 478
- C-25 shows these jacks 479
- RS-366 Jacks 481
- C.4.5 HSU-T V35 Card (8214) 482
- C.4.8 HSU Card Cables 488
- HSU CARD DCE PROVIDES CLOCK 489
- RS530 V.35 RS449 489
- C.5 SRU Cards 490
- C.6 OCU-DP Cards 494
- C.6.2 OCU-DP 5 Card (8241) 496
- C.6.3 OCU-DP 10 Card (8246) 498
- C.7 FRAD Cards 500
- C.8 DS0-DP Cards 502
- C.9 B7R Cards 504
- C.10 BRI Cards 506
- C.10.2 BRI-SC U*8 Card (8261) 507
- C.10.3 BRI-ST*8 Card (8262) 508
- Port Designation Pin # 509
- C.10.5 BRI-2 U*8 Card (8264) 511
- C.10.6 PM-IOR Card (8280) 512
- 2. Not connected 513
- C.11 Server Cards 514
- C.11.2 ACS-ATM Card (8820) 515
- C.11.4 IPR 10BT Card (8831) 517
- C.12 E&M Cards 518
- C.13 FXS Cards 526
- C.13.2 FXS 2W*8-6 Card (8219) 527
- C.14 FXO Cards 528
- C.14.2 FXS Coin Card (8149) 529
- C.14.3 FXO Coin Card (8159) 530
- C.15 P-Phone Cards 531
- Glossary 533
Prodotti e manuali riguardandi Networking ADC Kentrox ISDN NT1 1010
Networking ADC Kentrox ISDN NT1 1010 Specifiche
(24 pagine)
(24 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.134 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale